Dedsec Bluetooth Exploit
DEDSEC BLUETOOTH EXPLOIT
bt_dedsec is a bluetooth hacking device/tool using (esp32 nodemcu and esp-prog) can perform dos attack on any bluetooth device like bluetooth speaker,smartphone,IoT device, etc. using BRAKTOOTH exploit
Braktooth is a collection of flaws affecting commercial bluetooth stacks on more than 1,400 chipsets used in billions of devices - including smartphones, PCs, toys, speakers, internet of things(Iot) devices and industrial equipment - that rely on bluetooth Classic (BT) for communication
requirements:
ESP32-devkit v1 nodeMCU
ESP-prog
Jumper wire female-female (8pcs)
Data usb cable
Ubuntu 18.04
VMWare
USB 3.0 port
installation:
Open VMWare and USB 3.0 enabled. We recommend Ubuntu 18.04
1. git clone https://github.com/0xbitx/DEDSEC-Bluetooth-exploit.git
2. cd DEDSEC-Bluetooth-exploit
3. sudo apt install unzip python3-dev
4. unzip bt_dedsec.zip
5. cd bt_dedsec
6. sudo pip install -r requirements
7. connect esp32 nodeMCU via usb cable to your pc
8. sudo esptool.py erase_flash (boot button maintained)
9. connect the esp32 nodemcu and esp-prog
pinout :
----------------------------------------
no. Esp-prog Esp32
----------------------------------------
1. GND - GND
2. 3.3v - 3.3v
JTAG
3. TMS - gpio14
4. TCK - gpio13
5. TDO - gpio15
6. TDI - gpio12
SERIAL
7. TX - TX
8. RX - RX
----------------------------------------
10. connect esp-prog via usb cable to your pc
11. cd firmware
12. sudo python3 firmware.py flash /dev/ttyUSB1 (check your esp prog path | command: ls /dev/ttyUSB* )
13. then hold the BOOT button on (esp32 nodemcu) - dont forget to press RESET button afterwards
usage:
sudo python3 bt-dedsec.py
help:
datasheet for ESP32 NODEMCU
datasheet for ESP32 PROG